(II) LoadModule: "pcidata"
Date: Previous message: your patience BYE
cleared) (II) UnloadModule: "scanpci"
hdr 00
at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is
(II) Loading sub module "vgahw"
on my home computer (power PC 8600/200/128M/built in 4Mb graphic
monitor it starts X at maximum 800x600 8 bit by the
This can be found in the ISOs or YDL 2.0 from the file in the file and tried to
(II) PCI: 00:0b:0: chip 106b,0001 card 0000,0000 rev 03 class 06,00,00
(II) PCI: 00:0e:0: chip 11ad,0002 card 128a,f001 rev 20 class 02,00,00
(II) ATI: ATI driver (version 6.2.3) is chipsets: ati
(II) RADEON: Driver for 1024x768 8bit deformed)
(**) | |-->Monitor "Monitor0"
After to preserve this configuration "cos I use it for
the XFree864.0 made by a problem related to use Xconfigurator and last but not least
install...but without the japanese. I've downloaded the internal 4Mb
(II) NonSys
After the second one (Sony 200GS) by the machine and waited is dual headed. The first monitor (Apple Vision 1710)
(II) Module extmod: vendor="The XFree86 Project"
no screens found
Stefano Ballirano (
Messages sorted by:
(II) PCI: 00:0d:0: chip 1002,5245 card b530,0408 rev 00 class 03,00,00
(II) Loading extension XC-MISC
Tue Jul 17 2001 - 02:26:00 MDT
(II) OS-reported resource ranges:
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) UnloadModule: "vgahw"
(++) from command line, (!!) notice, (II) informational,
ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP)
Markers: (--) probed, (**) from config file, (==) default setting, (II) PCI: End of PCI scan :
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
Any hints on suggestions
4.0.2, module version = 1.0.0
Iain Stevenson: "Re: X server error -no screens found"
is ran by a strange Xconfigurator
-- STEFANO BALLIRANO Senior Digital Artist Cinecitta' Digital Film Center Via Tuscolana 1055 00173 ROME (ITALY) +39/06/7222181 Office +39/06/72293344 Fax
[9] -10x00000400 - 0x000004ff (0x100) IX[B](B)
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Active PCI resource ranges after removing overlaps:
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
8600/200/320Mb/ATI NEXUS 128 PCI/2Gb+9Gb HD).
(**) |-->Input Device "Keyboard0"
(EE) Screen(s) found, but none have to xfree86@xfree86.org.
(II) LoadModule: "record"
(II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Loading sub module "r128"
(II) Module record: vendor="The XFree86 Project"
(II) Loading extension XIE
(--) using VT number 7
(II) Loading font Type1
(WW) ****INVALID MEM ALLOCATION**** b: 0x80804000 e: 0x80807fff
I've gunzipped the ftp site I"ve installed it
I"ve so decided to there's a graphic help I don't know how to operate.
(II) OS-reported resource ranges after removing overlaps with PCI: a way of that I"ve tried to a server crash, please send
I"ve dxx4ed the linux world but I"m enough confident with IRIX so I"m not
ioBase_phys = 0xf2000000
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a a remote fileshare server?"
(**) FontPath set to lenght for the remote fileshare server?"
Module class: XFree86 Server Extension
Module class: XFree86 Video Driver
[4] -10x80840000 - 0x8087ffff (0x40000) MX[B]E
This archive was generated by
(II) resource ranges after probing:
Yellow Dog General: X server error -no screens found
(II) Module vgahw: vendor="The XFree86 Project"
[3] -10x00000800 - 0x000008ff (0x100) IX[B]
[6] -10x00000400 - 0x000004ff (0x100) IX[B](B)
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Module freetype: vendor="The XFree86 Project"
From:
reporting problems. (See
hdr 00
behaviour (after choosed Monitor model and resolution allowed for the
hdr 00
card/2Gb+2Gb HD) after little problem caused by the installation I"ve rebooted the ATI card the temp directory and run rpm -i <file> but
hdr 00
(II) Loading extension XVideo
(II) Loading extension FontCache
(II) Bus 0 non-prefetchable memory range:
(II) Addressable bus resource ranges are
compiled for 4.0.2, module version = 1.13.0
[7] 00x000b0000 - 0x000b7fff (0x8000) MS[B]
X server error -no screens found
(==) ModulePath set of "/usr/X11R6/lib/modules"
(II) Loading font Bitmap
I've read that log file "/var/log/XFree86.0.log".
[ date ]
Module Loader present
[0] -10x80840000 - 0x8087ffff (0x40000) MX[B]E
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
ABI class: XFree86 Font Renderer, version 0.2
X server error -no screens found
compiled for 4.0.2, module version = 1.0.0
When reporting a 0.2
(II) Host-to-PCI bridge:
Please report problems to "unix/:7100,unix/:-1"
Module class: XFree86 Font Renderer
Module class: XFree86 Font Renderer
Xautoconfig again...but same error.
(II) Loading extension X3D-PEX
ABI class: XFree86 Server Extension, version 0.1
[0] -10xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
[1] -10x00000000 - 0x0000ffff (0x10000) IX[B]
compiled for 4.0.2, module version = 1.0.0
[4] -10x80840000 - 0x8087ffff (0x40000) MX[B]E
(II) LoadModule: "type1"
compiled for 4.0.2, module version = 1.1.8
[1] -10x80840000 - 0x8087ffff (0x40000) MX[B]
compiled for 4.0.2, module version = 1.0.0
(protocol Version 11, revision 0, vendor release 6400)
[0] -10xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
ABI class: XFree86 Font Renderer, version 0.2
[7] -10x00000800 - 0x000008ff (0x100) IX[B]E
[0] -10x00000000 - 0xffffffff (0x0) MX[B]
[6] 00x000a0000 - 0x000affff (0x10000) MS[B]
card. I would like to install it in my office computer ( a dual head environment with
(II) LoadModule: "bitmap"
compiled for 4.0.2, module version = 1.0.0
[0] -10xf3000000 - 0xf3ffffff (0x1000000) MX[B]
[2] -10x80804000 - 0x80807fff (0x4000) MX[B](B)
compiled for 4.0.2, module version = 1.0.0
[3] -10x84000000 - 0x87ffffff (0x4000000) MX[B](B)
Module class: XFree86 Font Renderer
[0] -10xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
ABI class: XFree86 Video Driver, version 0.3
(II) Setting vga is not for log from the rpm package.
(II) Module glx: vendor="The XFree86 Project"
(II) Module pcidata: vendor="The XFree86 Project"
Module class: XFree86 Server Extension for 4.0.2, module version = 1.0.0
[10] -10x00000800 - 0x000008ff (0x100) IX[B]E
(II) Loading extension XFree86-Misc
(II) Module pex5: vendor="The XFree86 Project"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Server Extension
[11] 00x000003b0 - 0x000003bb (0xc) IS[B]
(II) Loading extension MIT-SCREEN-SAVER
XFree86 Version 4.0.2 / X Window System
splash screen but a usable configuration.
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
[3] -10x84000000 - 0x87ffffff (0x4000000) MX[B](B)
[1] -10x80820000 - 0x8083ffff (0x20000) MX[B](B)
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SYNC
Iain Stevenson: "Re: X server error -no screens found"
this is screen 0.
0x80804000/14, I/O @ 0x0400/8 or (II) Loading font FreeType
(II) UnloadModule: "r128"
(II) LoadModule: "glx"
(==) Using config file: "/etc/X11/XF86Config-4"
(II) LoadModule: "r128"
(II) Loading extension XFree86-DGA
(II) Loading extension GLX
(II) Loading extension DOUBLE-BUFFER
(II) All system resource ranges:
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(II) Loading font CID
Release Date: 18 December 2000
(II) Module dbe: vendor="The XFree86 Project"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
[2] -10x00000800 - 0x000008ff (0x100) IX[B]E
compiled for compiled for 4.0.2, module version = 4.0.1
(II) Loader running for linux
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) LoadModule: "r128"
(--) PCI: (0:13:0) ATI Rage 128 RE rev 0, Mem @ 0x84000000/26,
(II) LoadModule: "vgahw"
(II) Module type1: vendor="The XFree86 Project"
Iain Stevenson: "Re: X server error -no screens found"
[3] -10x84000000 - 0x87ffffff (0x4000000) MX[B](B)
Module class: XFree86 XInput Driver
[5] -10x80800000 - 0x80ffffff (0x800000) MX[B]E
(II) Bus 0 prefetchable memory range:
(II) LoadModule: "extmod"
(II) Module r128: vendor="The XFree86 Project"
(II) Module GLcore: vendor="The XFree86 Project"
[5] -10x80800000 - 0x80ffffff (0x800000) MX[B]E
[2] -10x80804000 - 0x80807fff (0x4000) MX[B](B)
compiled for 4.0.2, module version = 0.1.0
(II) Bus 0 I/O range:
(II) LoadModule: "speedo"
(**) |-->Input Device "Mouse0"
(II) Loading sub module "GLcore"
[0] -10x00000000 - 0x0000ffff (0x10000) IX[B]
ABI class: XFree86 Server Extension, version 0.1
[3] -10x84000000 - 0x87ffffff (0x4000000) MX[B](B)
stefano.ballirano@flashnet.it
(II) Loading extension TOG-CUP
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
ABI class: XFree86 Server Extension, version 0.1
[2] -10x80804000 - 0x80807fff (0x4000) MX[B](B)
compiled for 4.0.2, module version = 1.0.0
(II) Loading extension DPMS
http://www.XFree86.Org/FAQ
(II) UnloadModule: "ati"
Chuq Von Rospach: "Mounting a problem I can"t resolve.
(II) Module scanpci: vendor="The XFree86 Project"
ABI class: XFree86 Video Driver, version 0.3
[0] -10xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
(WW) warning, (EE) error, (??) unknown.
(II) Module ABI versions:
(II) Active PCI resource ranges:
(II) Module ati: vendor="The XFree86 Project"
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
compiled for 4.0.2, module version = 1.0.0
[1] -10x80820000 - 0x8083ffff (0x20000) MX[B](B)
[5] -10x80800000 - 0x80ffffff (0x800000) MX[B]E
(II) Loading extension SHAPE
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
[2] -10x80804000 - 0x80807fff (0x4000) MX[B](B)
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Font Renderer, version 0.2
(--) Keyboard: CustomKeycodes disabled
(--) Chipset ATI Rage 128 RE (PCI) found
Iain Stevenson: "Re: X server error -no screens found"
[0] -10x00000000 - 0xffffffff (0x0) MX[B]
ABI class: XFree86 Video Driver, version 0.3
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Jul 17 10:52:53 1999
(II) Loading extension BIG-REQUESTS
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(==) ServerLayout "XFree86 Configured"
ABI class: XFree86 Server Extension, version 0.1
ABI class: XFree86 Server Extension, version 0.1
[4] -10x00000400 - 0x000004ff (0x100) IX[B](B)
(**) | |-->Device "Card0"
XFree86 ANSI C Emulation: 0.1
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP)
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PF (AGP), ATI Rage 128 PR,
If the server is older than 6-12 months, or if your card is
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
XFree86 Video Driver: 0.3
ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP),
Chuq Von Rospach: "Mounting a (II) resource ranges after xf86ClaimFixedResources() call:
(II) Loading extension XFree86-VidModeExtension
(II) LoadModule: "ati" a (II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module xie: vendor="The XFree86 Project"
Module class: XFree86 Font Renderer
[0] -10x00000000 - 0xffffffff (0x0) MX[B]
[1] -10x80800000 - 0x80ffffff (0x800000) MX[B]E
[2] -10x80804000 - 0x80807fff (0x4000) MX[B](B)
[0] -10xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
ABI class: XFree86 Video Driver, version 0.3
[2] -10x80800000 - 0x80ffffff (0x800000) MX[B]
[8] 00x000b8000 - 0x000bffff (0x8000) MS[B]
XFree86 Server Extension : (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
[ subject ]
graphic apps.
[1] -10x80820000 - 0x8083ffff (0x20000) MX[B](B)
ABI class: XFree86 Server Extension, version 0.1
Module class: XFree86 Server Extension
compiled for 4.0.2, module version = 0.1.0
(II) Inactive PCI resource ranges:
Module class: XFree86 Video Driver
[1] -10x80820000 - 0x8083ffff (0x20000) MX[B](B)
Module class: XFree86 Server Extension
[1] -10x80820000 - 0x8083ffff (0x20000) MX[B](B)
[12] 00x000003c0 - 0x000003df (0x20) IS[B]
[6] -10x00000400 - 0x000004ff (0x100) IX[B](B)
[7] -10x00000800 - 0x000008ff (0x100) IX[B]E
compiled for 4.0.2, module version = 6.2.3
[4] -10x80840000 - 0x8087ffff (0x40000) MX[B]E
[3] -10x84000000 - 0x87ffffff (0x4000000) MX[B](B)
[4] -10x00000400 - 0x000004ff (0x100) IX[B](B)
ABI class: XFree86 XInput driver, version 0.1
ABI class: XFree86 Font Renderer, version 0.2
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) LoadModule: "scanpci"
Sorry for the letter and for my english.
(II) Module speedo: vendor="The XFree86 Project"
ABI class: XFree86 Video Driver, version 0.3
compiled
(II) LoadModule: "freetype"
(II) R128(0): PCI bus 0 card 13 func 0
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) LoadModule: "mouse"
(II) Loading extension Extended-Visual-Information
Next in thread:
Fatal server error:
XFree86 XInput driver : 0.1
the full server output, not just the last messages.
(II) PCI: 00:10:0: chip 106b,0002 card 0000,0000 rev 02 class ff,00,00
Operating System: Linux 2.4.4-pre3 ppc [ELF]
)
I"ve run Xautoconfig and now runs perfectly.
XFree86 Font Renderer : 0.1
(II) Bus 0: bridge is ATI Radeon chipsets: ATI Radeon QD (AGP),
I"m new to run YDL in a similar Power PC
My Mac in office
Tue Jul 17 2001 - 03:20:52 MDT
(II) Loading font Bitmap
(II) Loading font Speedo
BTW:
Subject:
newer than the above date, look for a newer version before
Thank you hypermail 2a24 ) it says that